Pantech.AI

Limited Seats 🤩

Make Your Own Microcontroller board & Design your own IoT Applications

PANTECH-AI-TRANS

shanmathi

“Understanding UART: A Complete Guide to Universal Asynchronous Receiver-Transmitter”

Leave a Comment / General / By

Introduction to UART: Universal Asynchronous Receiver-Transmitter UART (Universal Asynchronous Receiver-Transmitter) is a widely used serial communication protocol that facilitates data exchange between microcontrollers, computers, and peripheral devices. Unlike other communication protocols like I2C and SPI, UART operates asynchronously, meaning it doesn’t require a shared clock signal between devices. This makes UART ideal for simple, low-cost …

“Understanding UART: A Complete Guide to Universal Asynchronous Receiver-Transmitter” Read More »

How to Configure the Inbuilt Push Button on the STM32F411RE Microcontroller

Leave a Comment / General / By

In this Blog, How to configure the built push button on an stm32f411re microcontroller if you have already read the blog, which is about “How to configure inbuilt LED on an stm32f411re”. Here the Link for that blog link https://pantech.ai/wp-admin/post.php?post=22532&action=edit Before diving directly into microcontroller programming, it’s crucial to understand the datasheet and reference manual. These …

How to Configure the Inbuilt Push Button on the STM32F411RE Microcontroller Read More »

How to Configure Inbuilt LED on the STM32F411RE Microcontroller

Leave a Comment / General / By

In the previous Blog clearly explained about, “How to configure inbuilt LED procedure and using through registers(special function registers)”.  Link add In this Blog full and fully gonna be configured inbuilt LED through special function registers using code. #code explanation would be from the scratch As well as how to create a new project in …

How to Configure Inbuilt LED on the STM32F411RE Microcontroller Read More »

How to Install STM32CUBE IDE on Windows

Leave a Comment / General / By

I Hope everyone is ready to work with STM32F411RE Microcontroller before we need software, which helps to configure and interface with your microcontroller! Let’s start the installation with step by step procedure for STM32CUBE IDE:- 1. Visit this Link to get software to download! Fig 1 Install page https://www.st.com/en/development-tools/stm32cubeide.html#get-software 2. Download the software STM32CubeIDE-Win Fig …

How to Install STM32CUBE IDE on Windows Read More »

How to Configure the Inbuilt LED on STM32F411RE Microcontroller using SFR

Leave a Comment / General / By

In the whole ARM Cortex-M4 series, we are going to start with an LED, which means “How to configure the inbuilt LED”. Before going with a direct Microcontroller part.  Let’s start with a Datasheet and Reference manual. How it’s gonna play a major role in this part. Datasheet: https://www.alldatasheet.com/datasheet-pdf/pdf/929997/STMICROELECTRONICS/STM32F411RE.html Reference manual: https://www.st.com/resource/en/reference_manual/rm0383-stm32f411xce-advanced-armbased-32bit-mcus-stmicroelectronics.pdf Just click that …

How to Configure the Inbuilt LED on STM32F411RE Microcontroller using SFR Read More »