In this Blog, How to configure the built push button on an stm32f411re microcontroller if you have already read the blog, which is about “How to configure inbuilt LED on an stm32f411re”. Here the Link for that blog link Before diving directly into microcontroller programming, it’s crucial to understand the datasheet and reference manual. These documents …
In the previous Blog clearly explained about, “How to configure inbuilt LED procedure and using through registers(special function registers)”. Link add In this Blog full and fully gonna be configured inbuilt LED through special function registers using code. #code explanation would be from the scratch As well as how to create a new project in …
Configuring an Inbuilt LED via program with a Special Function Register Read More »
I Hope everyone is ready to work with STM32F411RE Microcontroller before we need software, which helps to configure and interface with your microcontroller! Let’s start the installation with step by step procedure for STM32CUBE IDE:- 1. Visit this Link to get software to download! Fig 1 Install page https://www.st.com/en/development-tools/stm32cubeide.html#get-software 2. Download the software STM32CubeIDE-Win Fig …
In the whole ARM Cortex-M4 series, we are going to start with an LED, which means “How to configure the inbuilt LED”. Before going with a direct Microcontroller part. Let’s start with a Datasheet and Reference manual. How it’s gonna play a major role in this part. Datasheet: https://www.alldatasheet.com/datasheet-pdf/pdf/929997/STMICROELECTRONICS/STM32F411RE.html Reference manual: https://www.st.com/resource/en/reference_manual/rm0383-stm32f411xce-advanced-armbased-32bit-mcus-stmicroelectronics.pdf Just click that …